Audio-Technica | 1800 Series Camera-mount UHF Wireless Systems | | |  |  |  | |
| |  | | Click on a photo to view a larger image | |
MSRP* US$720.00-$1,795.00
*Manufacturer's Suggested Retail Price.| Actual selling price may vary; please check with an authorized Audio-Technica dealer.
With UHF reception (996 frequencies user-selectable in 25 kHz steps), Audio-Technica's new 1800 Series camera-mount wireless microphone systems provide extremely flexible, professional, and easy-to-use portable wireless solutions. The 1800 Series is available in dual-channel and single-channel systems.
For simultaneous operation of two microphones, dual-channel 1800 wireless systems include the ATW-R1820 dual receiver with two completely independent receiver channels in a single unit. Dual balanced outputs enable signals to be mixed, or independently assigned to each output. Independent audio level controls provide flexible audio mixing and monitoring possibilities.
For those using a single microphone, the single-channel 1800 Series systems include the ATW-R1810 single-channel receiver.
1800 Series wireless systems come equipped with a choice of plug-on and body-pack transmitters. The ATW-T1801 UniPak« body-pack transmitters feature a professional locking 4-pin connector compatible with all Audio-Technica Wireless Essentials« microphones. The ATW-T1802 plug-on transmitters feature a locking XLR connector for adapting dynamic and condenser microphones. Both transmitters offer selectable high and low transmission modes to conserve battery life/maximize power.
Additional 1800 Series features include automatic frequency scanning, Tone Lock? squelch, back-lit LCD, soft-touch buttons, headphone monitor output with independent level control, and durable metal construction.
- Two completely independent receiver channels in a single unit, for simultaneous operation of two microphones (dual-channel systems)
- Compact receiver is easy to mount on a camera
- UHF reception with 996 frequencies selectable in 25 kHz steps
- Automatic frequency scanning for easy selection of open channels
- Tone Lock? squelch system eliminates interference when transmitter is off
- Two independent balanced outputs (dual-channel systems)
- Headphone monitor output with independent level control
- Battery fuel-level indicators on transmitters and receiver
- Soft-touch controls for easy frequency selection
- True Diversity operation for resistance to multi-path interference and dropouts
- LCD frequency and battery status display with backlight
- Antenna and AF Peak LED indicators
- Dual-channel receiver can operate in single-receiver mode to extend battery life when only one audio channel is in use (dual-channel systems)
- Transmitters operate in low or high transmission modes to conserve battery life/maximize power
- Easy, user-friendly operation
- Clear, natural sound quality
- Powered by AA batteries
- System components of the 1800 Series and 3000 Series Wireless Systems can be used interchangeably**
| | ATW-1821
Includes ATW-R1820 dual-channel receiver, two ATW-T1801 UniPak« body-pack transmitters and two lavalier microphones. | MSRP* US$1795.00 |
| | | ATW-1822
Includes ATW-R1820 dual-channel receiver and two ATW-T1802 plug-on transmitters. | MSRP* US$1795.00 |
| | | ATW-1823
Includes ATW-R1820 dual-channel receiver, ATW-T1801 UniPak« body-pack transmitter, ATW-T1802 plug-on transmitter and a lavalier microphone. | MSRP* US$1795.00 |
| | | ATW-1811
Includes ATW-R1810 single-channel receiver, ATW-T1801 UniPak« body-pack transmitter and a lavalier microphone. | MSRP* US$720.00 |
| | | ATW-1812
Includes ATW-R1810 single-channel receiver and ATW-T1802 plug-on transmitter. | MSRP* US$720.00 |
| | | ATW-1813
Includes ATW-R1810 single-channel receiver, ATW-T1801 UniPak« body-pack transmitter, ATW-T1802 plug-on transmitter and lavalier microphone. | MSRP* US$1,020.00 |
OVERALL SYSTEM SPECIFICATIONS | | | | Operating Frequencies | UHF Band D: 655.500 to 680.375 MHz |
| | Number of Channels | 996 total per band (25 kHz increments) |
| | Frequency Stability | ?0.005%, Phase Lock Loop frequency control |
| | Modulation Mode | FM |
| | Normal Deviation | ?10 kHz |
| | Operating Range | 100 m (300') typical |
| | Operating Temperature Range | 23? F (- 5? C) to 113? F (45? C) |
| | Frequency Response | 70 Hz to 15 kHz | | | |
RECEIVER SPECIFICATIONS | | | | Receiving System | Dual independent RF sections, automatic-switching diversity |
| | Image Rejection | >50 dB typical |
| | Signal-to-noise Ratio | 104 dB at 30 kHz deviation (A-weighted), maximum modulation 37 kHz |
| | Total Harmonic Distortion | <1% (?10 kHz deviation at 1 kHz) |
| | Sensitivity | 25 dB?V, (S/N 60 dB at 5 kHz deviation, A-weighted) |
| | Audio Output | Balanced: 27 mV (at 1 kHz, ?5 kHz deviation) |
| | Output Connector | 3-pin mini XLR (TA3M-type) |
| | Monitor Headphone Output | (typical) 35 mW max., 32 ohm load (per channel) |
| | Monitor Headphone Jack | 3.5 mm TRS, signals on both Tip and Ring |
| | External Power Requirements | 12V DC nominal, 500 mA |
| | Batteries | ATW-R1820: Six 1.5V AA alkaline (not included); ATW-R1810: Four 1.5V AA alkaline (not included) |
| | Current Consumption | Dual-channel Operation: 600 mA typical; Single-channel Operation 350 mA typical |
| | Battery Life | Dual-channel Operation (ATW-R1820): 6 hours typical*
Single-channel Operation (ATW-R1810): 10 hours typical*
* depending on battery type and use pattern |
| | Dimensions | ATW-R1820: 85.0 mm (3.35") W x 133.0 mm (5.24") H x 36.0 mm (1.42") D
ATW-R1810: 75.0 mm (2.95") W x 125.0 mm (4.92") H x 32.0 mm (1.25") D |
| | Net Weight | ATW-R1820: 425 grams (15.0 oz) (without batteries)
ATW-R1810: 300 grams (10.5 oz) (without batteries) |
| | Accessories Included | ATW-R1820: Two flexible UHF antennas; two 18" TA3F to XLRM output cables; belt pouch
ATW-R1810: Two flexible UHF antennas; 18" TA3F to XLRM output cable; belt pouch | | | |
BODY-PACK TRANSMITTER SPECIFICATIONS | | | | RF Power Output | High: 30 mW; Low: 10 mW, nominal |
| | Spurious Emissions | Under federal regulations |
| | Dynamic Range | >105 dB, A-weighted |
| | Input Connections | High impedance, low impedance, bias |
| | Batteries | Two 1.5V AA alkaline (not included) |
| | Current Consumption | High: 180 mA; Low: 160 mA, typical |
| | Battery Life | Approximately 6 hours (High); 8 hours (Low),
depending on battery type and use pattern |
| | Dimensions | 66.0 mm (2.60") W x
87.0 mm (3.43") H x
24.0 mm (0.94") D |
| | Net Weight | 80 grams (2.8 oz) (without batteries) |
| | | |
PLUG-ON TRANSMITTER SPECIFICATIONS | | | | RF Power Output | High: 30 mW; Low: 10 mW, nominal |
| | Spurious Emissions | Under federal regulations |
| | Input Connector | 3-pin locking XLRF-type |
| | Batteries | Two 1.5V AA alkaline (not included) |
| | Current Consumption | High: 180 mA; Low: 160 mA, typical |
| | Battery Life | Approximately 6 hours (High); 8 hours (Low),
depending on battery type and use pattern |
| | Dimensions | 40.0 mm (1.57") x
111.0 mm (4.37") x
40.0 mm (1.57") |
| | Net Weight | 199 grams (7.0 oz) (without batteries) |
| | | |
Microphone Power (ATW-T1802 Plug-on Transmitter): Provides power to condenser microphones rated to
operate on 12V phantom power or less.
**Note: The 1800 Series offers UHF wireless operating frequencies in 25 kHz steps, while the 3000 Series offers UHF wireless operating frequencies in 125 kHz steps. This means that not every frequency selectable on 1800 Series components will be selectable on the 3000 Series components. Be certain to set each Transmitter-Receiver pair to identical frequencies.
|
|
