| Frequency Response (at 1
watt into 4 ohms, 20Hz - 20 kHz) |
+0/–1 dB
|
| Signal to Noise Ratio (below rated
8-ohm power at 1 kHz, A-weighted) |
100 dB
|
| Damping Factor (8 ohm): 20 Hz to 400
Hz |
> 500
|
| Input Stage |
Input is electronically balanced and employs
precision 1% resistors
|
| AC Line Current |
CDi 1000: 11.50A, CDi 2000: 11.93A, CDi 4000: 11.75A
At idle: Draws no more than 45 watts.
|
| Crosstalk (below rated power) 20 Hz
to 1 kHz |
> 70 dB
|
| Input Impedance (nominal) |
20 kilohms balanced, 10 kilohms unbalanced
|
Load impedance (note: safe with all
types of loads)
Dual
Bridge mono |
2–8 ohms
4–16 ohms
|
| Voltage Gain (at 1 kHz, 8 ohm rated
output) |
CDi 1000: 30.5 dB, CDi 2000: 32.9 dB, CDi 4000: 34.2 dB
|
| Sensitivity (at 8 ohm rated output) |
1.4V
|
| Maximum Input Signal |
+22 dBu typical
|
| Operating Temperature |
0° C to 40° C at 95% relative humidity (non-condensing)
|
| AC Line Voltage and Frequency
Configurations Available (± 10%) |
100V, 120V-240V, 50/60 Hz
|
| Ventilation |
Flow-through ventilation from front to back
|
| Cooling |
Heat sinks and proportional-speed fan
|
| Dimensions: Width, Height, Depth
(behind mounting surface) |
EIA Standard 19 in. W (EIA RS-310-B)
x 3.5 in. (8.9 cm) H x 12.25 in. (31.1cm) D
|
| Net Weight, Shipping Weight |
19 lb (8.6kg), 22 lb (10.0 kg)
|
