|
Bogen CSD2X2 Drop-In Ceiling Speaker Price Each Sold In Pairs Bogen's CSD2X2 Drop-In Ceiling Speaker is a full-range speaker that allows for fast and easy installation, which saves installation time, effort, and cost. The CSD2X2 is a 2' x 2' speaker that fits perfectly into place in 2'x 2' ceiling frames - without needing to cut ceiling tiles or requiring the use of tile support rails. The CSD2X2 can also be easily installed in 2' x 4' ceiling tiles - just make one cut to the ceiling tile, position the support rail, and drop the speaker into place. Finely perforated grille over the entire front of speaker Fully enclosed, industrial grade steel construction 70V/25V, 4-watt transformer (4, 2, 1, .5, .25 watt) taps; selected by rotary switch 8" main cone with secondary high frequency cone For use with both 2 ft. x 2 ft. and 2 ft. x 4 ft. suspended tile ceilings Support rail crossbar (included) SPECIFICATIONS Frequency Response . . . . . . . . . . 95 Hz - 20 kHz SPL @ 1W / 1M . . . . . . . . . . . . . . . 94 dB Power Taps . . . . . . . . . . . . . . . . . . 4, 2, 1, .5, .25 Dispersion @ 2 kHz (6 dB down). . . . . . . . . . . . . . . . . .100° Cone Material & Surround . . . . . .Treated paper Cones . . . . . . . . . . . . . . . . . . . . . . . 8" main cone with secondary high frequency cone Magnet Weight . . . . . . . . . . . . . . . .10 oz. Connection . . . . . . . . . . . . . . . . . . . Via wire nuts (included in electrical box) Dimensions . . . . . . . . . . . . . . . . . .23 -13⁄16" W x 5" H x 23-13⁄16" D Architect and Engineer Specifications The speaker shall be a Bogen Model CSD2x2 Drop-In Ceiling Speaker, which shall be fully enclosed and constructed of industrial grade steel. It shall be comprised of a damped high-compliance factory-mounted 8" loudspeaker that shall consist of an 8" treated paper main cone, a secondary high frequency cone, and a 10 ounce magnet. The unit shall have a 70V/25V transformer with power taps of 4, 2, 1, .5, and .25 watts, selectable by rotary switch. Output shall be 94 dB @ 1 watt / 1 meter (min.). Frequency response shall be 95 Hz - 20 kHz (min.). The speaker shall have a non-reflective, white metal finish grille. The speaker assembly will fit into 2' x 2' and 2' x 4' ceiling tires. For 2' x 2' installations, a support rail shall not be needed and no cuts to the ceiling shall be necessary. For 2' x 4' installations, a single cut to the ceiling tile and an included support rail shall be needed. The speaker shall measure 23-13/16" W x 5" H x 23-13/16" D |