Bogen - PI35A HIGH POWER 25 STATION INTERCOM UPC 765368430059

Bogen PI35A Control Center, 35-watt Program 8-watt Intercom, 25 Stations, Non-Expandable

Bogen PI35A 25 Station High Power Intercom Control Center

Communication with up to 25 (PI35A) or

75 speaker-equipped stations (SI35A)

Instant emergency/all-call paging

Separate 35-watt program and 20-watt

intercom channels

Tone calling; light identifies calling remote

Time signal, night bell, or telephone paging capabilities

Color-coded controls for easy operation

Executive styling

The SI35A and PI35A are handsome, dual-channel Intercom and Program distribution systems designed to serve the intercom and program distribution needs of schools, businesses and institutions. The SI35A serves up to 75 rooms or remote locations and provides custom flexibility in a space saving design. Furnished with 25 room selector switches, it has space available for 75, or for a Bogen CR-100 cassette player/tuner and 50 room switches. The PI35A provides communication for up to 25 remote locations.

In addition to their intercom function, the SI35A and PI35A can distribute program material from a variety of sources, such as microphone, tape or tuner, and can distribute tone signals and emergency announcements.

Each unit includes a built-in 20-watt intercom amplifier and separate 35-watt program amplifier. These permit instant communication with any location without interrupting the distribution of program to others.

The control panel features color-coded buttons and guides, with step-by-step instructions, allowing even first time users to operate the system easily. Emergency announcements to all locations are accomplished with a single push button and take precedence over all other system functions. Facilities are included for all-call distribution of a tone signal (for classroom changes or telephone night bell) and telephone paging.

Remote stations may be wall-mounted or ceiling-mounted loudspeakers, or horn-type speakers in high-noise or outdoor locations that enable hands-free reply when called. A call-in switch can be provided at any remote station where call initiation capability is desired.

When the control panel selects a remote for intercommunication or monitoring, the remote receives a repeating tone signal. Calls to the control center are announced by tone signal and identified by light annunciation.

The control centers provide a 25-volt balanced line output to drive a distributed speaker system. Recommended wiring is 3-conductor, shielded, 18, 20 or 22 AWG. Room connection is made easy using crimp-on connectors.

The control centers are constructed of sturdy materials and are finished in an attractive simulated walnut.

Accessories

CA10 - Call-in switch, 2-position

CA11 - Call-in switch, 3-position with privacy

CA17 - Call-in switch, push button (use with SCR25A)

RK78 - Mounting kit for CR-100 in SI35A

SBA225 - 2 Station selector panel for SI35A

SCR25A - Call-in module for SBA225

2518 - Connector kit, 20 Ga.

2522 - Connector kit, 22 Ga.

TL156 - Insertion tool for connector kits