PRI OCIDE 5 Gal - Industrial Microbicide Stabilizer Treats 38400 gallons

1 Review

Ask a Question

Extra Hazardous shipping charge may apply.

For this product to protect you fully, also need purchase PRI-D.

Fast Acting Fuel Algae Killer Diesel Fuel.

instantly kills any bacteria or fungi in and prevents further growth. contains two active ingredients that work together synergistically kill growth both the water emulsified oil is created by microorganisms your Effective on all fuels MDOs MGOs home heating oils bunker Can be safely combined with PRI-D so enhance performance of simultaneously Use when refueling keep free from contamination thereby safeguard valuable engine.

Economical To Use – Best yet, PRI-OCIDE is extremely economical to use. On first application to the fuel, PRI-OCIDE is dosed at the “shock treatment” ratio of 1:5000. Thereafter, this already economical dose rate is cut in half, and PRI-OCIDE is used at its “Maintenance Treatment” ratio of 1:10,000. For best results, we recommend application with an online dosing pump.

Effective In All Diesel and Heavy Fuels – EPA registered PRI-OCIDE is effective in all diesel fuels, MDOs, MGOs, home heating oils, and bunker fuels. PRI-OCIDE can also be safely combined with PRI-D Stability/Lubricity Fuel Treatment, so that you can protect your diesel fuel while at the same time, enhance the fuel’s performance. Use PRI-OCIDE on a continued basis to keep your fuel supply free from contamination.

Available in 55-gallon drums and five-gallon pails.

Dosage Rate:
SHOCK TREATMENT:
PRI-OCIDE shock treatment dosage rate is 1:5,000. This rate is recommended for all
initial dosing.

MAINTENANCE TREATMENT:
For ongoing protection against microbial growth, PRI-OCIDE should be dosed at a rate of 1:10,000.

Dosage Method:
Power Research Inc. suggests that PRI-OCIDE be dosed at the main bunker manifold by means of a safe and easily operated air driven gear pump arrangement. However, PRI-OCIDE is highly miscible with fuel and may be added directly to tanks prior to fueling. Agitation from fuel flow into the tank typically provides a sufficient mixture.

DANGER: PRI-OCIDE is corrosive, causes irreversible eye damage and causes skin burns. May be fatal if swallowed or absorbed through skin. Do not get in eyes or on clothing. Do not breathe vapor or spray mist. Wear goggles or face shield, protective clothing and rubber gloves while using this product or carrying wet unfinished goods. Wash thoroughly with soap and water after handling and before eating, drinking or using tobacco. Remove and wash contaminated clothing before re-use. Prolonged or frequently repeated skin contact may cause allergic reactions in some individuals. Wash hands before eating, drinking, chewing gum using tobacco or using the toilet.