| Bogen TPU250 250-Watt Telephone Paging Amplifier | |||||||||
|
TPU15A, TPU35B, TPU60B, TPU100B, TPU250
|
|||||||||
Bogen models TPU35B,TPU60B,TPU100B,
and TPU250 are wall-mounted telephone paging amplifiers rated at 35, 60, 100,
and 250 watts, respectively. The TPU250 can also be rack-mounted.This group of
TPU amplifiers permits paging from telephone and/or microphone.Music input
through an RCA jack or screw terminals.Voice-activated, variable level, music
mute with fade back after page. All the TPU amps in this group include a night
ringer which sends an electronic ringing tone signal through all speakers,
alerting personnel of incoming calls during non-business hours. Jacks are also
provided to bridge two TPU amplifiers to double the number of inputs and
outputs.
• 35, 60, 100, and 250-watt models
• Inputs for 600-ohm balanced telephone line, LO-Z balanced
microphone, and background music
• Music input (RCA jack or screw terminals)
• Integral automatic level control (ALC) circuit for controlling
pages made by persons with varying voice levels and paging
techniques
• Page from telephone and/or microphone
• Signal-activated paging channel automatically mutes background
music
• Adjustable background music muting level during a page
• Music gradually returns to its normal level after a page
• Aphex® Aural Exciter increases intelligibility, improves
perceived loudness (with no increase in power), and reduces
listener fatigue
• Separate controls for page volume, music volume, night ringer,
music mute, and Aphex® Aural Exciter
• Bass and treble controls
• Built-in night ringer activated by contact closure or by 90V
ring signal
• Balanced or unbalanced 16-ohm, 25V, 25VCT, and 70V outputs
are available for the TPU35B/60B/100B models; 25V and 70V
outputs are available on the TPU250
• VOX sensitivity level control eliminates transmission of background
noise when paging from a telephone
• Thermal and electronic overload protection
• Jacks provided for bridging additional TPU amplifiers
• Brackets are attached for easy wall mounting;TPU250 can be
rack-mounted
• TPU-B models can be rack-mounted with RPK82 kit
• Peak level indicator lights when amplifier is driven into clipping
• 120V AC, 60Hz power source
• UL and CSA listed
Frequency Response: 70Hz to 15kHz ±1dB
Distortion: Less than 1%
Hum & Noise: (20Hz to 20kHz) MUSIC: -70dB; TEL: -70dB; MIC: -55dB
Sensitivity: MUSIC: 85mV; TEL: -20dBm (77mV); MIC: 600µV
Tone Control: BASS: ±9dB @ 100Hz; TREBLE: ±9dB @ 10kHz
Regulation: 2dB
Inputs: TEL: 600-ohm balanced line, transformer-isolated
MUSIC: Hi-Z source, RCA jacks or screw terminals
MIC: LO-Z balanced, screw terminal connection
MUSIC MUTE: Mutes music during a microphone page
CONTACT RING: Sounds night ringer tone when customer-supplied dry
contacts are closed
TEL RING: Sounds night ringer in response to 90V ring signal
BRIDGING: Permits bridging of two amplifiers
Outputs: 25V, 25VCT, and 70V, 16 ohms balanced or unbalanced for 35/60/100-watt
models;
25V and 70V for TPU250. Provision for WMT1A line-matching transformer
Controls & Indicators: POWER & PEAK LEVEL LED indicators. APHEX,TREBLE, BASS,VOX
SENS,
RINGER VOLUME, MUSIC MUTE, MUSIC VOLUME, MIC VOLUME, TEL VOLUME,
ALC controls (screwdriver-adjustable)
Overload Protection: All models have thermal and electronic overload protection.
TPU35B: 1.0A, 120V AC circuit breaker; TPU60B: 1.6A, 120V AC circuit breaker;
TPU100B: 2.5A, 120V AC circuit breaker; TPU250: 6.0A slow blo fuse
Power Requirements: (120V AC, 60Hz) TPU35B: 0.75A; TPU60B: 1.5A; TPU100B: 2A;
TPU250: 5A
Operating Temperature: -4°F (-20°C) to 131°F (+55°C)
Finish: Black with silver lettering
Dimensions: TPU35/60/100B models: 14-3/16" W x 8-3/8" H x 3-5/8" D
TPU250: 19" W x 10-1/2" H x 3-13/16" D
Shipping Weight: TPU35B: 16 lbs.; TPU60B: 17 lbs.; TPU100B: 21 lbs.; TPU250: 31
lbs.