Crown XLS 402D Power Amplifier
It’s Back….and this time it includes the new
High Power XLS5000
Crown will be running an end user rebate program on XLS beginning May 1st.
The rebate will be in effect from May 1st through June 30th 2008.
The rebate amounts are as follows:
XLS 202 - $30
XLS 402 - $60
XLS 602 - $90
XLS 802 - $120
XLS5000 - $120
Once again, this a great opportunity to get your
entry-level customers into a solid Crown amp when they might have otherwise
considered an alternate lower quality product because of price constraints. i.e.
Behringer, Mackie, etc. etc.
XLS Series

XLS 5000 Not Shown
Minimum
Guaranteed Power
per channel, both channels driven |
| |
XLS 202 |
XLS 402 |
XLS 602 |
XLS 802 |
XLS 5000 |
1 kHz with
0.5% THD
Stereo, 2 ohms (per ch.)
Stereo, 4 ohms (per ch.)
Stereo, 8 ohms (per ch.)
Bridge-Mono, 8 ohms
Bridge-Mono, 4 ohms |
--
300W
200W
600W
--
|
--
450W
300W
900W
--
|
--
600W
380W
1,200W
--
|
--
800W
500W
1,600W
--
*750W for
100V
models
|
2,500W**
1,800W*
1,100W*
3,600W*
5,000W**
*with 0.1% THD
**with 1% THD
|
- Reliable design incorporates many popular features
- Housed in a rugged, all-steel 2U chassis (3U in the
XLS 5000)
- Efficient forced-air fans prevent excessive thermal
buildup
- Electronically balanced XLR inputs; touchproof
binding post and Speakon® outputs
- Precision detented level controls, power switch,
power LED, and six LEDs which indicate signal, clip and fault for
each channel.
- Three-Year, No-Fault, Fully Transferable Warranty
completely protects your investment and guarantees its
specifications
For product availability and pricing please contact your local
dealer.
|
|
Specifications
Sensitivity (volts RMS)
for full rated power at
4 ohms |
1.25
|
| Frequency Response (at 1 watt, 22 Hz
- 20 kHz) |
+0 dB, –1 dB
|
Signal to Noise Ratio below rated
power (20 Hz to
20 kHz, inputs terminated)
A-weighted, below rated power
No weighting, below rated power |
> 100 dB
> 95 dB
|
| Total Harmonic Distortion (THD) at 1
full bandwidth power, from 20 Hz to 1 kHz |
< 0.5%
|
| Intermodulation Distortion (IMD) 60
Hz and 7 kHz at 4:1, from full rated output to –30 dB |
< 0.3%
|
| Damping Factor (8 ohm): 10 Hz to 400
Hz |
> 200
|
Crosstalk (below rated power)
at 1 kHz
at 20 kHz |
–75 dB
–50 dB
|
Input Impedance (nominal) (balanced,
unbalanced) |
20 kilohms, 10 kilohms
|
Load impedance
Stereo
Bridge mono |
4-8 ohms
8 ohms
|
| AC Line Voltage and Frequency
Configurations Available (± 10%) |
120 VAC 60 Hz
100 VAC 50/60 Hz
220 VAC 50 Hz
230-240 VAC 50 Hz
|
| Ventilation |
Flow-through ventilation from front to back
|
| Cooling |
Internal heat sinks with forced-air cooling
|
Air Volume Requirements (per minute
per unit) |
80.15 ft3 (2.27 m3)
|
| Dimensions: Width, Height, Depth |
XLS 202, 402, 602, 802: EIA Standard 19"W (EIA RS-310-B) x
3.5” (8.9 cm) H x15.2" (38.6cm) D.
XLS 5000: EIA Standard 19"W (EIA RS-310-B), 5.25” ( 13.3 cm)
H x 15.5” (39.5 cm) D.
|
| Net Weight, Shipping Weight |
XLS 202: 23.0 lb (10.4 kg), 28.0 lb (12.7 kg)
XLS 402: 25.7 lb (11.7 kg), 30.7 lb (13.9 kg)
XLS 602: 29.0 lb (13.2 kg), 34.0 lb (15.4 kg)
XLS 802: 35.5 lb (16.1 kg), 40.5 lb (18.4 kg)
XLS 5000: 62.0 lb (27.7 kg), 74.0 lb (33.6 kg)
|
|
|