Lowell WB-4T Grille-4in Speaker Steel Torsion Mount 7.25in Dia White

Write a Review

Ask a Question

Torsion speaker grille with contoured edge and very low projection is made for use with a 4 inch speaker (E.I.A. 5 inch). Steel with white finish.

SPECIFICATIONS

• Style: Torsion

• Material: 20-gauge steel outer ring with punched center, contoured edge

• Finish: White

• Size: 7.25 in. diameter

• Mounting Projection: 0.25 in.

• Mounting Provisions: Torsion bracket spring devices accommodate a variety of ceiling depths, welded studs w/nuts

CERTIFICATION & COMPLIANCE

• Made in U.S.A.

• Certified U.S. steel

The grille for 4 in. speaker drivers shall have no visible screws or hardware and shall be Lowell Model WB-4T. It shall be fabricated from one-piece 20-gauge steel reinforced with a peripheral flange and finished in white powder epoxy. The grille diameter shall be 7.25” with a shallow mounting projection of 0.25 in. Model WB-4T shall include welded studs and nuts for mounting specified 4 in. (EIA 5 in.) speaker. It shall also include two torsion bracket/spring devices and installation accessories for mounting a speaker/grille assembly weighing up to 3.5 lbs. to specified Lowell backbox. The torsion/bracket method shall have no visible hardware and shall be adjustable for varying ceiling depths.

COMPATIBLE COMPONENTS (order separately)

• Drivers (4 in.): 4A30, JR410

• Recessed Backbox: DX104-T

• Tile-Bridge: LBS4-DX

• Support Rails: SS24, SS30