Atlas Sound IEDA528SK-H - Ethernet microphone expansion station, 4-button w/ 501HH mic

Write a Review

Ask a Question

Atlas Sound IEDA528SK-H - Ethernet microphone expansion station, 4-button w/ 501HH mic.

528 Series
Expansion Stations

Description
The capability of the 528 Series Digital Communication
Stations is expandable through the use of a variety of
available expansion options. The IEDA528E expansion
board provides an interface for up to three (3) expansion
microphone stations. Each station functions as a slave to the
parent microphone station to increase the number of paging
locations while reducing cabling cost. The slave stations
use the parent station’s CPU and Ethernet interface to send
announcements through the system. The IEDA528EAO
expands the capability of a 528 series microphone station
by providing a local analog audio output from the station.

IEDA528SK-H
The IEDA528SK-H Sidekick is a 4-button expansion station
that interfaces to a 528 series microphone station through
an IEDA528E expansion board. Up to three (3) Sidekick
stations can be connected to a parent station to expand
paging capability of the system. Each Sidekick connects to
its parent station using Category 5e or better cabling and
utilizes the parent station’s CPU and Ethernet interface to
transmit announcements through the system.

Each of the four (4) available buttons on each Sidekick are
independently configurable in the announcement controller
configuration software. Each button is capable of initiating a
live announcement, recorded announcement, or launching
a pre-recorded message. Each station also has a Push-toTalk (PTT) switch located on the hand-held microphone.
This PTT switch is directly tied to the PTT switch on the
parent station so the PTT functions are identical between
the parent and all slave stations. A user can go to the parent
528 series station or any of the expansion stations and
achieve the same announcement results by simply picking
up and keying the microphone

The IEDA528SK-H can be mounted in a standard 2-gang
electrical box or a standard 4-gang electrical box. It can
also be mounted to a 528 series backbox or a standard
4-gang electrical box using the IEDA528SKA adapter plate.
The optional IEDA528SKBB backbox can be purchased to
mount the unit on a standard single-gang electrical box or
on the IEDA520DTB desktop base for desktop mounting.

Data Sheet, Installation Sheet, Owners Manual and CAD drawing Available Upon Request. Each Item Varies.