Bogen - HTA125A MOSFET POWER AMP 125 WATT UPC 765368350135

Bogen HTA125A 125-Watt Rack-Mounting Amplifier

125 and 250 watt models

Power MOSFET circuitry

Designed for continuous operation at rated power

The Bogen Models HTA-125A and HTA-250A power amplifiers are rated at 125 watts and 250 watts, respectively. Input impedances are: high-impedance unbalanced; low-impedance balanced or unbalanced using an accessory transformer (Model TL600). Line bridging is possible using an accessory transformer (Model TL100). Both amplifiers have 4 W, 8 W, 25VCT and 70V outputs. They can safely drive any load continuously, even at +55°C (131°F). Failure protection includes a thermal breaker, overload limiting, short circuit protection and fuse. The amplifiers are designed for direct mounting in a standard 19” equipment rack (uses 3 spaces). UL listed.

Specifications Table Model Rated Power Frequency Response Distortion at RPO Outputs (Impedance) Power Consumption W x D x H & Shpg. Wt.

HTA-250A 250 Watts 20Hz to 20KHz ±1dB <0.5%, 20Hz - 20KHz 4, 8 W, 25VCT, 70V 520W (Idle 60W) 19” x 11” x 5-Ό”, 50 lbs.

HTA-125A 125 Watts 20Hz to 20KHz ±1dB <0.5%, 20Hz - 20KHz 4, 8 W, 25VCT, 70V 260W (Idle 45W) 19” x 11” x 5-Ό”, 36 lbs.

BPA-60 60 Watts 20Hz to 20KHz, -2dB <2%, 50Hz - 15KHz 8 W/25V, 16 W, 25VCT, 70V 180W 15-Ό” x 8” x 3-½”, 19 lbs.

GA-6A 6 Watts 30Hz to 12KHz, +0, -3dB 2% 8 W, 25V, 70V 16W 8-½” x 6” x 2-5/8”, 5 lbs.

GA-2 1.5 Watts 200Hz to 15KHz, +0, -2.5dB 2% 8 W, 600 W balanced 4W 5-½” x 2-Ό” x 4-1/8”, 1 lb.

TBA-15 15 Watts 200Hz to 10KHz (To Spkr.) <3% (To Spkr) 25V or 70V balanced line 84W 19” x 2-7/8” x 5-Ό”, 9 lbs.

MT-250D 250 Watts 20Hz to 20KHz, ±2dB <2%, 50Hz - 15KHz 8W, 12.5V, 25V, 70V, 100V 650W (Idle 30W) 19” x 12-½” 5-½”, 60 lbs.